Safety knowledge of gas heating stove: Ignition operation must be carried out after the heater is installed. Do not place the burner near the face. If the ignition does not smell the smell of liquefaction, please stop the ignition, and then continue the ignition operation after the liquefied gas is emitted from the combustion head.
1, the liquefied gas used by the gas heater must be pure propane liquefied gas, pure propane liquefied gas is more expensive than ordinary liquefied gas 5-10 yuan per tank (15 kg tank). The main components of liquefied gas include propane, butane, propylene, butene, etc. Pure propane is better than liquefied gas, and the price is much more expensive, and the general industry and hotels use propane more. Usually send liquefied gas companies have propane liquefied gas and cheap liquefied gas, as long as the purchase of pure propane gas can be.
2, during the operation process, once the control knob is rotated to the vent position, the igniter should be continuously pressed until it is ignited. If the ignition action is too slow, it will release a lot of gas, affecting the smell of space.
3, the cabinet gas heater is usually in addition to the first gear is directly ignited, the remaining two files are used to ignite, it takes about 2-3 seconds, this 2-3 seconds time there will be a small amount of gas discharge, resulting in space odor, so it is not recommended to switch often.
In addition, some small factories produce inferior cabinet heaters, the ignition time of 2 and 3 gears is relatively long and even up to 1 minute, in this case, the user can shake the hand in front of the combustion plate to accelerate the air flow, which can greatly shorten the ignition time and reduce gas leakage.
